Smoke and heat detectors for early fire warning systems. DC powered with reliable sensing technology.
Smoke and heat detectors for early fire warning systems. DC powered with reliable sensing technology.
| Power supply:DC9V replaceable battery | |
| Conform to EN14604:2005/AC:2008 | |
| Alarm volume: ≥85dB at 3m | |
| Current:static current <8uA | |
| Alarm current≤45mA | |
| Temp. Range:-10°C~+60°C | |
| Product life time> 10 years | |
| Low battery warning | |
| Silence time:Approx 10 mins | |
| Protection area :6m high, 60m2 | |
| Ceiling mounting, easy to install with mounting bracket | |
| Size:Φ101.5*36.5mm | |
| Operating voltage: AC Power 85-265V | |
| Alarm level: 10% ±5% LEL | |
| Sound Level:85dB/1m | |
| Auto reset after alarm | |
| Automatic detection of fault | |
| MCU processing adopted | |
| Induced gas-nature gas/LPG | |
| Working with electromagnetic valve or manipulator | |
| Malfunction auto-check indicator | |
| Conforms to EN50194 standard | |
| Warm-up time: 180s | |
| Independent: Sound&Flash alarm | |
| Dimension: 115*72*45mm | |
| Glass push button panel, can't reset, with LED indicator | |
| LED indicator:green for working, red for alarm | |
| Operation voltage:24VDC | |
| Max. Current: 1A at 24VDC | |
| Contact resistance: 0.2ohm | |
| Temp.range: -10 °C ~ +50°C | |
| Max.relative humidity: 93RH 2% | |
| Size:87x87x51mm | |
| Color: red, yellow, green | |
| The push button panel is plastic material can reset. | |
| Operation voltage: 9-28VDC | |
| Alarm. Current: <45mA | |
| Contact resistance: 0.2ohm | |
| Temp. range: -10°C~50°C | |
| Max. relative humidity: 93RH 2% | |
| Size:140*104*45mm | |
| Color: red | |
| Rated voltage:12V/24VDC | |
| Rated current: 80mA 100mA | |
| Flash intensity 1.2ws, flash period 1.5s | |
| Audio alarm 105 db | |
| Temperature range:-10°C ~ +55°C | |
| Humidity range: 95% | |
| The life-span of flash lamp's frequent; flashing: | |
| 40000 times | |
| The Xenon light is imported with high volume flash | |
| Size: 134L X 115W X 48Hmm | |
| Voltage: 24VDC (50mA)/ 12VDC (100mA) | |
| Sound: 100db + /- 5dB (at 24VDC, 1 meter) | |
| Strobe: 8,000mcd, six super bright led | |
| Tone: harmonic bell sound or sweep tone or siren sound | |
| Operating current (at 24VDC):22mA (bell only); | |
| 50mA (with strobe) | |
| Material: polycarbonate (UL94V-2) | |
| Color: red | |
| Size:82L x 82W x 52Hmm | |
| Working voltage: 100V-240V AC | |
| Response time: < 30 seconds | |
| Alarm volumn: > 85 dB (between 1m) | |
| Emission frequency: 315 MHZ / 433 MHZ | |
| Emission distance: open distance 100m | |
| Sensitive parts life: 7years | |
| Working temperature: - 10 °C ~ 45 °C | |
| Working humidity: 10% ~ 95% RH | |
| Alarm range:Natural gas:10% ~ 25% LEL, | |
| Coal gas: 2% ~ 5% LEL | |
| STANDALONE SMOKE DETECTOR | |
| XH-FD-02-06 | |
| GAS LEAKAGE DETECTOR | |
| WITH SHUT OFF VALVE | |
| XH-FD-03-01 | |
| FIRE CALL POINT | |
| WITH LED INDICATOR | |
| XH-FA-03-01 | |
| FIRE MANUL CALL POINT | |
| XH-FA-03-02 | |
| FIRE STROBE SOUNDER | |
| XH-FA-02-01 | |
| FIRE STROBE SOUNDER | |
| XH-FA-02-02 | |
| WIRELESS GAS DETECTOR | |
| XH-FD-03-02 | |
| FIRE ALARM BELL | |
| XH-FA-01-01 | |
| Base material: 6”/8” /10” | |
| Operating voltage: DC24V/220V | |
| Working current: 25mA | |
| Audio alarm: 95db | |
| Driving way: motor | |
| Operating Volt: DC 2*1.5 V replaceable battery | |
| Conform to EN50291 | |
| Sensor life:7 years | |
| Sensor type: Electrochemical | |
| Standby current: ≤200uA | |
| Alarm volume: ≥85dB at 1m | |
| 50ppm,alarms not activate within 120 minutes | |
| 50-100ppm,alarms within 80 minutes | |
| 100-300ppm,alarm with 30 minutes | |
| 300ppm,alarm within 50seconds | |
| Silence function: approx. 10mins | |
| Fault Alarm function | |
| Auto reset after alarm | |
| Size: Φ103*31mm | |
| Operating Volt: DC 3*1.5 V replaceable battery | |
| Sensor life:7 years | |
| Conform to EN50291 | |
| Sensor type: Electrochemical | |
| Standby current: ≤200UA | |
| Alarm volume: ≥85dB at 1m | |
| 50ppm, alarms not activate within 120 minutes | |
| 50-100ppm,alarms within 80 minutes | |
| 100-300ppm,alarm with 30 minutes | |
| 300ppm,alarm within 50seconds | |
| Silence function: approx. 10mins | |
| Fault Alarm function | |
| Auto reset after alarm | |
| Size: 125X73X35mm | |
| Power supply:DC9V replaceable battery | |
| Conform to EN14604:2005/AC:2008 | |
| Alarm volume: ≥85dB at 3m | |
| Current:static current <8uA | |
| Alarm current≤45mA | |
| Temp. Range:-10°C~+60°C | |
| Product life time> 10 years | |
| Low battery warning | |
| Silence time:Approx 10 mins | |
| Protection area :6m high, 60m2 | |
| Ceiling mounting, easy to install with mounting bracket | |
| Size:Φ101.5*36.5mm | |
| Power supply:DC9V replaceable battery | |
| Conform to EN14604:2005/AC:2008 | |
| Alarm volume: ≥85dB at 3m | |
| Current:static current <8uA | |
| Alarm current≤45mA | |
| Temp. Range:-10°C~+60°C | |
| Product life time> 10 years | |
| Low battery warning | |
| Silence time:Approx 10 mins | |
| Protection area :6m high, 60m2 | |
| Ceiling mounting, easy to install with mounting bracket | |
| Size:Φ101.5*36.5mm | |
| Power supply:DC9V replaceable battery | |
| Alarm Current:10mA | |
| Temp. Range:-10°C~+60°C | |
| Product life time> 10 years | |
| Low Voltage Alarm:5.5~6.2V | |
| Low Battery Alert Remain:7~15days | |
| Working Humidity:<93%RH | |
| Size:Φ140X41H MM | |
| Power supply:DC9V replaceable battery | |
| Alarm Current:10mA | |
| Temp. Range:-10°C~+60°C | |
| Product life time> 10 years | |
| Low Voltage Alarm:5.5~6.2V | |
| Low Battery Alert Remain:7~15days | |
| Working Humidity:<93%RH | |
| Size:Φ140X41H MM | |
| Power supply:7 years life (3V lithium battery(CR123A)) | |
| Sensor life:7 years | |
| Conform to EN50291 | |
| Sensor type: Electrochemical | |
| Standby current:≤200uA | |
| Alarm volume: ≥85dB at 1m | |
| 50ppm,alarms not activate within 120 minutes | |
| 50-100ppm,alarms within 80 minutes | |
| 100-300ppm,alarm with 30 minutes | |
| 300ppm,alarm within 50seconds | |
| Silence function: approx. 10mins | |
| Fault Alarm function | |
| Auto reset after alarm | |
| Size:Φ94*35mm | |
| CARBON MONXIDE DETECTOR | |
| WITH LCD INDICATOR | |
| XH-FD-01-01 | |
| CARBON MONOXIDE DETECTOR | |
| WITH LCD INDICATOR | |
| XH-FD-01-02 | |
| STANDALONE SMOKE DETECTOR | |
| XH-FD-02-04 | |
| STANDALONE SMOKE DETECTOR | |
| XH-FD-02-05 | |
| STANDALONE SMOKE DETECTOR | |
| XH-FD-02-02 | |
| STANDALONE SMOKE DETECTOR | |
| XH-FD-02-03 | |
| CARBON MONOXIDE DETECTOR | |
| WITH LCD INDICATOR | |
| XH-FD-01-03 | |
| STANDALONE SMOKE DETECTOR | |
| XH-FD-02-01 | |
| Power supply:DC9V replaceable battery | |
| Alarm Current:10mA | |
| Temp. Range:-10°C~+60°C | |
| Product life time> 10 years | |
| Low Voltage Alarm:5.5~6.2V | |
| Low Battery Alert Remain:7~15days | |
| Working Humidity:<93%RH | |
| Size:127ΦX44H MM | |
| Low standby current, Anti-RFI& anti-EMI | |
| Operating voltage DC 9V~35V | |
| Flashing led power indicator | |
| Alarm indication: red LED | |
| Standby current 55uA, | |
| Alarm current: 55mA@DC24V;25mA@DC12V | |
| Reset: power off or auto reset | |
| Alarm output: Remote led for 2 wires; Relay output for 4 wires | |
| Alarm point:ate-of-rise | |
| Alarm temperature rising rate 8 /M; | |
| Fixed temperature alarm: 57 (135 ) | |
| Standard ED54-7 U1268 | |
| Dimension D101mm.*H55mm | |
| Low standby current, Anti-RFI& anti-EMI | |
| Operating voltage:DC:9V~35V(orders:DC40~60V) | |
| Flashing led power indicator | |
| Standby current 55uA | |
| Alarm indication: red LED | |
| Alarm current: 55mA@DC24V;25mA@DC12V | |
| Reset: power off or auto reset | |
| Alarm output: Remote led for 2 wires; Relay output | |
| for 4 wires | |
| Sensitivity 0.13db/m(0.05db/m) | |
| Standard ED54-7 UL268 | |
| Dimension D103mm.*H53mm | |
| Low standby current, Anti-RFI& anti-EMI | |
| Operating voltage:DC:9V~35V(orders:DC40~60V) | |
| Flashing led power indicator | |
| Standby current 55uA | |
| Alarm indication: red LED | |
| Alarm current: 55mA@DC24V;25mA@DC12V | |
| Reset: power off or auto reset | |
| Alarm output: Remote led for 2 wires;Relay output | |
| for 4 wires | |
| Sensitivity 0.13db/m(0.05db/m) | |
| Standard ED54-7 UL268 | |
| Dimension D101mm.*H49mm | |
| Cabinet dedicated (48V-60V) | |
| Low standby current, Anti-RFI& anti-EMI | |
| Operating voltage DC9V~35V | |
| Flashing led power indicator | |
| Alarm indication: red LED | |
| Standby current 55uA, | |
| Alarm current: 55mA@DC24V;25mA@DC12V | |
| Reset: power off or auto reset | |
| Alarm output: Remote led for 2 wires;Relay output for 4 wires | |
| Alarm point:ate-of-rise | |
| Alarm temperature rising rate 8 /M; | |
| Fixed temperature alarm: 57 (135 ) | |
| Standard ED54-7 U1268 | |
| Dimension D101mm.*H49mm | |
| WIRED PHOTOELECTRIC | |
| SMOKE DETECTOR | |
| XH-FD-05-01 | |
| WIRED PHOTOELECTRIC | |
| SMOKE DETECTOR | |
| XH-FD-05-02 | |
| WIRED HEAT DETECTOR | |
| XH-FD-04-01 | |
| WIRED HEAT DETECTOR | |
| XH-FD-04-02 | |
| FIRE ALARM CONTROL | |
| PANEL 1~24 ZONES | |
| XH-CP-01-01 | |
| FIRE ALARM CONTROL | |
| PANEL 1/2/4 ZONES | |
| XH-CP-01-02 | |
| Battery and energy interruption alarm | |
| LED display | |
| Zone power, alarm, fault led indicators | |
| Manual alarm, siren and reset buttons | |
| Alarm output and siren output with relay | |
| AC input:110/220 VAC | |
| DC output: 24 VDC | |
| Battery type:2 x 12 V/1.3 Ah | |
| Detector connecting:20pcs (each zone) | |
| End of line resister: 10k | |
| Alarm output: Relay | |
| Siren output: Available | |
| Battery and energy interruption alarm | |
| Zone power, alarm, fault led indicators | |
| Manual alarm, siren and reset buttons | |
| Access key | |
| Alarm output and siren output with relay | |
| AC input:220 VAC | |
| DC output: 24 VDC | |
| Battery type:2 x 12 V/1.3 Ah | |
| Detector connecting:20pcs (each zone) | |
| End of line resister: 10K | |
| Alarm output: Relay | |
| Siren output: Available | |
| Display: Led | |